Your technician should discuss with you the adhesive used and the time it takes for it to properly bond the auto glass to your vehicle. This lets you make an informed decision as to when you feel the car is automobile windshield chip repair safe to drive.
Snow and ice: It is important to remove frost, snow, and ice as soon as possible. These elements greatly damage and weaken your windshield. Turn on your cars defroster and use a snow brush or ice scraper. Be gentle with the ice scraper as it too can damage the windshield.
A lot of people are confused between repair and replacement. There are those that opt for ready home kits to repair their windshields only to find out that they could not fix the problem. In essence, simple damage such as chips or cracks that is less than 3 inches can be repaired. However, when it becomes severe, you need to have it replaced. Also, damage within the critical vision area cannot be repaired so no matter how small it is, fix auto glass is the only solution.
Do-it-yourself repairs are the cheapest option but if not done correctly, it may cost you more. If you plan to do it yourself, it is important to choose the best kits. Research or seek the advice of experts so you would not be sorry. There are two types of windshield repair kits. The first is the less expensive syringe-type. The kit includes a syringe and the resin, intended for one-time use only. It contains just enough resin to repair one chip. The second type is the more expensive bridge system that includes the resin's and a plastic bridge. This type can be used several times because it is refillable.
Stay away from the sun. Park inside a garage when you can and use a protective windshield covering when you can't. If you let heat build up inside the car while you park, you might weaken the windshield and cause the crack to grow.
To further strengthen the windshield, the auto glass is subjected to a tempering phase. The sheet is heated to a temperature of 1565 degrees Fahrenheit or 850 degrees Celsius. It is then subjected to blasts of cold air. A piece of PVB plastic is sandwiched between two pieces of auto glass. The sandwich is heated inside an autoclave. This bonds the components together tightly and removes any trapped air.